You know exactly where your meter cupboard is. Whether it still meets the requirements is another question. Most of the time, the door only opens when the power goes out or a new hob arrives. Suddenly, those few switches raise all sorts of questions. Do you need a main switch? Are old fuses still allowed? And how many circuits do you actually need?
Quick answer: your meter cupboard must be safely arranged, and your electrical installation must meet the requirements that apply to your situation. Existing homes are not automatically subject to the same requirements as new builds. The main things to consider are suitable protection, proper earthing, appropriate wiring, sufficient capacity and an accessible, well-ventilated meter cupboard. New equipment, such as an induction hob, heat pump or EV charger, may require changes. Solar panels and home batteries also affect the design. Ask an electrician to assess what your home needs.
Jump to:
What is the difference between a meter cupboard and a distribution board?
What requirements must your meter cupboard meet? The checklist
What is the difference between a meter cupboard and a distribution board?
The meter cupboard is the space containing the connections and meters for utilities such as electricity, gas and water. The distribution board divides electricity between the circuits in your home. An older version with screw-in fuses is often called a fuse box.
This distinction matters when you book a job. Replacing a distribution board is different from moving the entire meter cupboard or increasing the capacity of your grid connection. An electrician works on your own installation. The grid connection and electricity meter are the grid operator's responsibility. Do not break any seals yourself.
Which requirements apply to existing homes and new builds?
Online advice often mixes up legal requirements, technical standards and practical recommendations. That can make it sound as though every older meter cupboard needs replacing immediately. It is not that straightforward.
For an existing home, the installation's history matters
An existing installation does not have to be completely renewed every time a new edition of a standard is published. The age of the home, the original installation and later alterations all matter. An older home is not automatically non-compliant simply because it has screw-in fuses. Damage or other unsafe conditions still need to be addressed.
New builds must meet the applicable safety requirements
The Dutch Buildings Decree, the Besluit bouwwerken leefomgeving, refers to NEN 1010 for low-voltage installations. This standard covers the electrical installation. The NEN-EN-IEC 61439 series is also relevant to the distribution board as an assembled product. Ask the installer to establish which edition applies: the latest published edition and the edition designated in legislation are not necessarily the same.
When renovating or extending, the installation must work safely as a whole
Adding a circuit does not automatically mean replacing all the wiring in your home. However, the electrician must assess whether the existing installation can safely support the extension. Existing components may also need adapting, such as protective devices, wiring or the main switch.
Unsure which requirements apply to your home? Have your electrical installation inspected before ordering components. Agree in advance which parts will be examined and what report you will receive.
What requirements must your meter cupboard meet? The checklist
The points below help you know what to look for and which questions to ask. They do not replace an inspection: some things can only be assessed through investigation and electrical measurements.
1. A suitable main switch
A main switch lets you switch off the connected household installation. A new distribution board should have a suitable main switch. For older installations, the requirement depends on the circumstances and installation history. Have this checked beforehand if the grid operator is due to carry out work.
Important: switching off the main switch does not mean that every component in the meter cupboard is without voltage. Do not remove protective covers and work behind them yourself.
2. Suitable residual-current protection
Residual-current protection disconnects the supply when the difference between outgoing and returning current becomes too large. It provides protection against certain electrical faults. In modern household installations, many circuits require additional protection with a rated residual operating current of no more than 30 milliamps.
This can be provided by residual-current devices, or RCDs, protecting several circuits, or by individual RCBOs. An RCBO combines residual-current protection with overload and short-circuit protection. Simply counting the separate RCDs you can see is therefore not enough. The electrician determines the appropriate arrangement and protective devices.
3. Proper earthing
An RCD does not replace proper earthing. Have the earth connection and protective conductors checked. In an older home, do not rely on a water pipe as the sole means of earthing. This is particularly important if metal water pipes have been replaced with plastic ones.
4. Circuits and protective devices suited to your appliances
There is no single number of circuits that suits every home. The required arrangement depends on the power demand and which appliances are used at the same time. An induction hob, EV charger or heat pump therefore calls for an assessment of the connection, circuits and protective devices.
Include a planned kitchen renovation or home energy upgrade in the assessment. This can help avoid having to modify the board again shortly afterwards.
5. Suitable wiring and a properly assembled board
Wiring and components must be suitable for their electrical load and intended use. Checking cable thickness alone is not enough: cable length, installation method and protective devices also matter. Components should be combined and installed according to the manufacturer's instructions.
A new board does not automatically make older wiring elsewhere in your home safe. Discuss whether the assessment covers only the board or the connected installation as well.
6. Easy access and sufficient working space
You need to be able to reach the meters and switches. That makes the meter cupboard a poor home for moving boxes, the vacuum cleaner and the bag that fits nowhere else. Keep the area in front of the cupboard clear too.
7. Ventilation and protection against leaks
Do not block ventilation openings. Ventilation is particularly important where there is a gas connection and is mandatory according to Liander. Equipment connected to water must be positioned so that leaks do not endanger electrical components. A water softener above electrical equipment is not a suitable arrangement.
8. Clear labelling and checks after work
Ask for an up-to-date circuit schedule and an explanation of the switches. When work is carried out, agree which checks and measurements will be performed and which results you will receive. A neatly finished front panel does not tell you whether the electrical protection works correctly.
Want to know the condition of your installation? During an electrical inspection, an electrician can inspect the installation and take measurements relating to earthing, insulation and residual-current protection. Include your plans for new equipment and energy upgrades when you book.
New appliances or home energy upgrades: what changes?
An induction hob, heat pump or EV charger changes what you ask of your electrical installation. Solar panels and home batteries add another factor: they can also supply electricity to the installation. A suitable meter cupboard therefore needs more than spare circuit positions. The connection, wiring, protective devices and simultaneous use all need to work together.
Induction hob or electric cooker: check the connection requirements
Not every hob needs the same connection. Depending on its model and power rating, it may need a standard final circuit, a suitable dedicated cooking circuit or a three-phase connection. An existing Perilex socket does not, on its own, tell you how it is wired. Have the installation checked against the appliance's wiring diagram.
Getting a new kitchen? Include the oven, dishwasher, boiling-water tap and other appliances in the circuit plan. The hob is not the only thing drawing power while you cook.
Heat pump: include any electric backup heater
The electrical input matters for the connection, not just the heating output shown in the quotation. A heat pump may need its own circuit and specific protection. Include any electric backup heating element and the hot-water system in the assessment.
Whether extra circuits or a higher-capacity connection are needed depends on the selected heat pump and the rest of your installation. A heat pump does not automatically require a larger grid connection.
Electric water heater or instantaneous heater: different power demands
A small under-sink water heater has different requirements from a powerful instantaneous shower heater. Have an electrician determine the circuit, wiring and connection required for your chosen appliance. Appliances that heat a large flow of water directly using electricity can place a substantial load on the installation.
Air conditioning and electric underfloor heating: consider the whole installation
Fixed air conditioning and electric underfloor heating can also affect the circuit layout. The connection needed depends on the system and its power demand. With several air-conditioning units or heating across larger areas, have the total load assessed, including other appliances used at the same time.
Sauna, hot tub or swimming-pool equipment: more than an extra socket
Heaters, pumps and other components can draw considerable power together. Have the electrician assess the connection and protection, including requirements relating to the location and use near water. A different distribution across phases or a higher-capacity connection may also be needed.
EV charger: capacity, dedicated protection and smart charging
An EV charger can draw substantial power for long periods. The installer assesses its dedicated circuit, cable route, suitable residual-current protection and available capacity. This includes other equipment running in the home and how the load is distributed across the phases.
With dynamic load balancing, a compatible charging system can adjust charging power to the capacity available on the connection. This can sometimes avoid a connection upgrade. Whether it works for your home depends on the installation and the charging speed you want.
Solar panels: electricity from the inverter matters too
Solar panels supply electricity to your installation through an inverter. Have the connection to a dedicated final circuit and its protection assessed. The installer must also check that the board's internal wiring and components are suitable for the currents that can flow in different parts of it.
A correctly rated main fuse alone does not establish this: some electricity can flow directly from the inverter to appliances. Have the whole arrangement assessed, including when you already have solar panels and add other equipment later.
Home battery: charging, supplying electricity and optional backup power
A home battery can both draw and supply electricity. Its impact on the distribution board depends on factors such as charging and discharging power, the inverter and any connection to solar panels. Not every system uses the same arrangement: some solar and battery systems share a hybrid inverter.
Want power during a grid outage? Discuss this separately. A home battery does not automatically provide backup power for your home. This requires a suitable system, safe changeover arrangements and separation from the public grid. Some installations supply backup power only to selected circuits.
Have it designed as one complete system
Tell the electrician what is installed now and what you may add later. Ask for a plan covering circuits, protective devices, phase distribution, internal current ratings and any energy management. An energy management system can coordinate consumption and storage, but it does not replace suitable electrical protection.
An induction hob this year, a heat pump next year and perhaps an EV charger after that? Include those plans now. It may save you from having to alter a recently renewed distribution board again.
How large does a meter cupboard need to be?
The grid operator also sets requirements for the meter space. These cover matters such as dimensions, location, accessibility, ventilation and space for connections.
For example, Liander's guidance for a new-build connection specifies a meter space measuring at least 240 centimetres high, 77 centimetres wide and 35 centimetres deep. These dimensions cannot be used to automatically approve or reject every existing cupboard.
An apartment, a non-standard connection or a relocation may need a different assessment. Have the applicable meter-cupboard specifications checked before building an enclosure or altering the space. A smart new door is useful. So is an engineer who can still get inside.
What can you safely check yourself?
Limit your checks to what is visible without removing protective covers.
Can you open the cupboard and easily reach the meters and switches?
Are ventilation openings clear?
Is there a readable circuit schedule?
Can you see damage, discolouration or signs of a leak?
Do circuits trip regularly, and what is running when this happens?
Are there new appliances or renovation plans that have not yet been assessed?
Test existing residual-current protection according to the manufacturer's instructions, provided the board is undamaged and safely accessible. If the test fails, have it checked. A successful test is not a complete inspection of the installation.
If you notice a burning smell, sparks or damage to the meter or grid connection, keep your distance and call the Dutch gas and electricity emergency service on 0800 9009. If there is smoke, fire or immediate danger, leave the home and call 112.
When should you upgrade or replace the distribution board?
Have the installation assessed if there are recurring faults, missing or unclear protection, damage or previous alterations you know little about. A new kitchen, EV charger or heat pump is another sensible time for a check.
The answer is not always a completely new board. Sometimes a targeted extension is enough. In other cases, the condition, limited space or technical design makes replacement more sensible.
The electrician examines the installation, discusses your current and future use, proposes a solution and checks the completed work. If a different grid connection is needed, the grid operator also becomes involved.
Where necessary, arrange for residual-current protection to be installed or a new distribution board to be fitted. Agree on the work, materials and any follow-up steps in advance.
What do customers say about upgrading their meter cupboard?
These experiences are based on reviews of real jobs completed through Zoofy, involving the installation and alteration of distribution boards.
Planning for the renovation at the same time. One customer describes how Peter and Rik visited beforehand and then replaced the complete meter-cupboard electrical board. Extra circuits were installed for a heat pump and induction hob. The customer appreciated the communication, efficient work and tidying up afterwards.
Discussing what is needed first. A customer who had a new board installed by Taoufik mentions the detailed discussion beforehand and explanations during the job. That helps you understand what is being done, rather than simply knowing that something is being replaced.
A targeted extension. Another customer describes Edward installing an additional circuit with residual-current protection. The customer praised the professional and tidy work. An example of an alteration addressing a specific need.
Customer reviews describe the experience of having the work carried out. Whether your installation meets the requirements needs to be established through a technical assessment.
What does an inspection, upgrade or replacement cost?
The cost depends on what needs examining and what work is required. When requesting a job, distinguish between:
Inspection: assessing the installation's condition and protection through an electrical inspection.
Alterations: for example, an additional circuit or suitable residual-current protection.
Replacement: a new distribution board, installation and checks.
Additional work: for example, earthing, new cable runs or work by the grid operator.
See the current information about an electrical inspection and having a distribution board installed. Ask what is included and how additional work will be agreed. A starting price is not a total price for every home.
Frequently asked questions about meter cupboard requirements
Does my old meter cupboard have to meet the latest NEN 1010?
Not automatically in full. For existing installations, the installation history and previous alterations matter. When extending or replacing the installation, the applicable requirements and any existing parts affected by the work must be assessed.
Are old screw-in fuses prohibited?
Not simply because they are screw-in fuses. The condition, protection and applicable requirements determine whether alterations are needed. Have an older board assessed if you do not know its history.
Must there always be two separate RCDs?
Counting visible separate RCDs is not a complete check. A board may use RCBOs instead. The necessary protection and arrangement depend on the design and applicable requirements.
Do I need three-phase electricity for induction cooking?
That depends on the hob and the available connection. Have the appliance and household connection requirements assessed before requesting a cooking circuit or connection upgrade.
Does a new distribution board mean the installation is safe?
No. Earthing, wiring and connections outside the board must also be in good condition. Ask which parts were included in the inspection.
Does my distribution board need replacing for new equipment?
Not always. An extension may be possible. The installer must assess whether the connection, available space, protection and internal current ratings are suitable for the chosen equipment and the rest of the installation.
Check whether your meter cupboard suits your home
You do not need to memorise electrical standards. Gather a photograph of the front of the board, information about previous alterations and your plans for new equipment. Through Zoofy, you can book a screened electrician to assess the situation. You pay through Zoofy after the work is completed.
Then you know what needs doing. And you can close that door again.
Book an electrical inspection through Zoofy.
Further reading: Vereniging Eigen Huis guidance on electrical installations, NEN information about NEN 1010 and Liander's meter-cupboard requirements. These sources and the linked booking pages are in Dutch.
My name is Wilm, a construction and home improvement expert at Zoofy, with many years of experience in the construction and renovation sector. Over the years, I have supervised countless projects, ranging from small maintenance jobs to full-scale renovations. This hands-on experience has taught me how essential transparency in pricing and quality is for every project.
At Zoofy, I share my knowledge about construction costs, pricing, and smartly comparing jobs. Whether it’s the cost of a painter, a plumber’s hourly rate, or the price of a complete bathroom renovation, I help you understand what a fair price is and what to look out for.
My goal is to make home improvement projects more transparent, so everyone knows where their money goes. By combining up-to-date pricing information with real-world experience, I make it easier to find the right professional—without any surprises afterward.