The oven is on. You switch on the kettle and suddenly half the kitchen loses power. By now, you know exactly which switch to flip. Handy, until tomorrow.
Does the same circuit breaker trip or the same fuse blow when you run several appliances at once? The circuit is probably overloaded. Switch the appliances off and use high-power appliances on that circuit one at a time. If one appliance keeps cutting the power, or the breaker trips again with all plug-in devices disconnected, stop resetting it and have the fault checked. If there is smoke, a fire or immediate danger, leave the building and call 112.
Jump to:
What tripped: a circuit breaker, fuse or RCD?
People often say “a fuse blew” when a switch in the fuse box has tripped. A circuit supplies part of your home, such as several kitchen sockets. An older fuse box may protect that circuit with a fuse that blows. A circuit breaker trips when it detects an overload or a short circuit.
An RCD (residual current device) trips when it detects current leaking from the circuit. One RCD can protect several circuits, so sockets and lights in different rooms may lose power together. An RCBO combines the functions of an RCD and a circuit breaker. If you can safely see the labels in the meter cupboard, note which switch is off.
What do you notice? | What might it mean? |
|---|---|
The same breaker trips when the oven | The circuit may be overloaded. |
The breaker trips as soon as you switch | The appliance, plug or lead may have a fault, such as a short circuit. |
The RCD trips and several circuits lose power. | Current may be leaking because of a faulty appliance or moisture in a connection. |
The breaker trips even after you unplug | There may be a fault in a hardwired appliance, a socket, the wiring or the breaker itself. |
Why does the power cut out when you use several appliances at once?
Too much power on one circuit
A 2,500-watt oven and a 2,000-watt kettle draw 4,500 watts together at full power. If they share a circuit, that may be enough to trip the breaker or blow the fuse. Check the appliance label or manual to see how much power each appliance draws.
A faulty appliance or lead
If the breaker trips whenever you switch on one particular appliance, even when the other high-power appliances are off, the appliance or its lead may be faulty. Leave it unplugged and have it checked.
Earth leakage
If the RCD trips, a faulty heating element or a damp connection may be causing current to leak. Note when it happens. For example, a dishwasher that cuts the power as soon as it starts heating the water gives the electrician a clue.
A fault in the fixed installation
A damaged socket, faulty wiring or a faulty breaker can also cut the power. If the breaker still trips with your plug-in devices disconnected, leave the circuit switched off and call an electrician.
What can you safely do yourself when a breaker trips?
Only carry out these checks if the meter cupboard is dry, undamaged and safe to reach, and there is no burning smell, sparking or smoke. Leave the covers in place.
Check what lost power. Note which lights and sockets went off and which switch controls them if the labels make that clear.
Write down what was running. Include appliances that switch on or start heating automatically, such as a dishwasher.
Switch off the affected appliances. Unplug them where you can safely reach the plugs. Leave hardwired appliances and wiring alone.
Reset the circuit breaker once if you are sure which one tripped. If it trips again, leave it off and have the fault checked. If a fuse blew or you are unsure which device cut the power, stick to the visual checks.
Use high-power appliances one at a time if the breaker stays on and the power only cut out when you ran those appliances together. If one appliance keeps triggering the fault, leave it unplugged.
Can't see a clear pattern? Book an electrician to find the fault. Tell them which switch tripped and what was running at the time.
When do you need to act immediately?
Smoke, fire or immediate danger? Leave the building and call 112.
A burning smell, sparks or a visibly discoloured socket? Stay clear of the socket and plug, leave the circuit off and get help immediately.
Does the breaker trip again or cut out during normal use? Leave the circuit off and have an electrician find the cause.
What should an electrician check?
The electrician identifies which appliances and sockets share the circuit. They can measure the load and check the breaker, connections and wiring. Depending on what they find, they may replace a faulty part, redistribute the load or install a separate circuit. They then test the installation.
If a single plug-in appliance is clearly causing the fault, have it checked by an appliance repair technician. If the whole street has lost power, report it to the Dutch electricity network operator on 0800 9009.
Do you need an extra circuit or a new fuse box?
If the circuit overloads every time you run the oven and dishwasher together, an electrician can see whether an existing circuit can take one of the appliances or whether you need to have an extra circuit installed. That may involve running a new cable from the fuse box to the appliance.
If your existing fuse box, also called a consumer unit, is in good condition and can accommodate the change, adding a circuit may be enough. A damaged or unsuitable unit may need replacing. When you have the fuse box replaced, the meter and the cupboard itself can usually stay in place.
How can you prevent the breaker from tripping again?
If the breaker only trips when you use a particular combination of high-power appliances, run them one at a time. If you regularly need them together, have an electrician check how the loads are shared. Repeated resets leave the cause unresolved. A fault in a socket or wiring can generate enough heat to cause damage or a fire.
Plug high-power appliances directly into a suitable wall socket. A power strip adds sockets to the same circuit. The socket across the kitchen may also be on that circuit, so check the labels in the meter cupboard.
What does it cost to have the fault checked?
Finding a fault, replacing a part and installing an extra circuit take different amounts of time and materials. With a new circuit, the cable route also affects the price. See Zoofy's electrician price guide for typical costs and discuss what work is needed once the electrician has found the fault.
Frequently asked questions
Why does the breaker trip or the fuse blow after a few minutes?
With an overload, it can take time for the breaker to trip or the fuse to blow. An appliance that starts heating partway through its cycle can also explain the delay.
Can I fit a higher-rated fuse?
Have an electrician check the fuse rating. It has to match the wiring and the installation. A higher-rated fuse can let the wiring overheat before it blows.
Will plugging the appliance into another socket help?
It can help with an overload if that socket is on a different, suitable circuit. Check the labels in the meter cupboard. If you suspect the appliance itself is faulty, leave it unplugged.
Can I keep using the circuit if the power comes back?
If the breaker only tripped with a particular combination of high-power appliances and stays on during normal use, run those appliances one at a time. If it trips again, leave the circuit off and have it checked.
Find out why your circuit breaker keeps tripping
Want to cook without keeping track of everything that's already switched on? When you book, tell us which breaker trips, what is running at the time and when it started. Zoofy connects you with a screened electrician and you pay afterwards.
My name is Wilm, a construction and home improvement expert at Zoofy, with many years of experience in the construction and renovation sector. Over the years, I have supervised countless projects, ranging from small maintenance jobs to full-scale renovations. This hands-on experience has taught me how essential transparency in pricing and quality is for every project.
At Zoofy, I share my knowledge about construction costs, pricing, and smartly comparing jobs. Whether it’s the cost of a painter, a plumber’s hourly rate, or the price of a complete bathroom renovation, I help you understand what a fair price is and what to look out for.
My goal is to make home improvement projects more transparent, so everyone knows where their money goes. By combining up-to-date pricing information with real-world experience, I make it easier to find the right professional—without any surprises afterward.