Blog
probleem oplossen

Should you add a circuit or replace your consumer unit?

Wilm Everts
Wilm Everts
17 November 2026 · ~ 5 min. read
Should you add a circuit or replace your consumer unit?

You’ve picked out your new induction hob. Now for the question you put off at the kitchen showroom: can your consumer unit handle it?

You can add a circuit if your existing consumer unit is safe, suitable and has room for the right protective devices. You may need a replacement if the unit is damaged, its protection can’t be brought up to scratch with a smaller repair, or your plans call for a different setup. In most cases, the meter cupboard itself can stay as it is. It may need some work if there’s too little space or the electricity meter is hard to reach.

Jump to:

When can you add a circuit to your consumer unit?

Adding a circuit is often enough if your existing installation is in good condition and you need a dedicated supply for an appliance or an area of your home. Think of an oven in your new kitchen, equipment in the shed or a dedicated circuit for a compatible induction hob. The manufacturer’s wiring diagram sets out what connection and protection the appliance needs.

Can’t see any spare slots? An electrician can sometimes fit an additional enclosure beside your existing consumer unit. There needs to be enough space, and the existing installation has to be suitable for the extra circuit. The electrician may also need to run a new cable to the appliance or wherever you need power.

Planning to add an EV charger, a heat pump, solar panels or a home battery? Mention those plans upfront. An extra circuit gives an appliance its own supply within the home. How much you can run at the same time also depends on the capacity of your mains connection. If you have solar panels, the electrician will also consider how much electricity you export to the grid.

When should you replace your consumer unit?

An electrician may recommend fitting a new consumer unit if a repair or an extra circuit can’t make the existing unit safe or suitable. For example, overheating may have damaged several components, compatible replacement parts may no longer be available, or the unit may need substantial changes to accommodate new circuits and protective devices.

If you have an older unit with screw-in fuses, ask an electrician to assess its condition and protection before deciding whether to replace it. Does the same circuit breaker or residual current device (RCD) keep tripping? Have the cause checked first. The fault could be in an appliance or the wiring.

Switching from single-phase to three-phase power? Ask your electrician to check in advance whether your current consumer unit can be adapted or needs replacing. The electrician prepares your home’s installation, and the grid operator changes the mains connection.

Does the whole meter cupboard need replacing?

In most cases, the work is limited to the consumer unit. The meter cupboard is the space that houses your electricity meter, consumer unit and other equipment. The consumer unit contains the circuits’ protective devices. An electrician can replace the unit while keeping the cupboard and meter in place.

The cupboard may need alterations if the new equipment won’t fit safely, fixed panelling blocks access to the meter or service connection, or you plan to move the cupboard during a renovation. Sometimes clearing space or removing panelling is enough. If the mains connection needs moving or changing, your grid operator explains which requirements apply and handles the work on its connection and meter.

What can you check yourself?

Open the meter cupboard door and leave the consumer unit cover in place. Here’s what you can gather for your electrician:

  • Take a photo of the front of the unit. Include the breakers or fuses, labels and any blanking plates. A blanking plate can indicate spare space. The electrician will check whether it can be used.

  • Look up your connection rating. Check your grid operator’s customer portal to see whether you have, for example, 1 × 35 A or 3 × 25 A.

  • Write down what you want to connect. Find the make, model number and wiring diagram for your new appliance. Mention any other appliances you expect to run at the same time.

  • Keep track of when the power goes off. Note which switch trips, which appliances were running and which part of the house lost power. Have repeated interruptions investigated.

Notice a burning smell near the consumer unit or signs of melted plastic? Keep clear of the unit. If you suspect a fire or see smoke or flames, go outside and call 112. If you find signs of overheating and there’s no immediate danger, have an electrician inspect the unit as soon as possible.

What should an electrician check?

Ask your electrician to assess the consumer unit, wiring and connections. They’ll also check the earthing, residual current protection and main switch. For your new appliance, they’ll determine what circuit, cable and protection it needs, how much power you’re likely to use at once and whether your current mains connection can handle it.

Ask what the work involves. You might need an extra circuit, an additional enclosure, a replacement consumer unit or changes to the mains connection or meter cupboard. That way you know what the electrician can do and whether you need to contact the grid operator.

What did this look like on Zoofy jobs?

One customer had their consumer unit replaced and a dedicated hob circuit installed at the same time. On another job, the electrician kept the existing unit and added a circuit with residual current protection. Both examples come from customer reviews of jobs booked through Zoofy.

Unsure what your home needs? Book an electrician to assess your consumer unit. Add a photo and a brief description of your plans so the electrician knows what to look at.

Schedule a professional right away? Quickly find a reliable professional in your area.
Book your job →
Wilm Everts

My name is Wilm, a construction and home improvement expert at Zoofy, with many years of experience in the construction and renovation sector. Over the years, I have supervised countless projects, ranging from small maintenance jobs to full-scale renovations. This hands-on experience has taught me how essential transparency in pricing and quality is for every project.

At Zoofy, I share my knowledge about construction costs, pricing, and smartly comparing jobs. Whether it’s the cost of a painter, a plumber’s hourly rate, or the price of a complete bathroom renovation, I help you understand what a fair price is and what to look out for.

My goal is to make home improvement projects more transparent, so everyone knows where their money goes. By combining up-to-date pricing information with real-world experience, I make it easier to find the right professional—without any surprises afterward.